Sun control film E-Lite 45 Xtra Exterior

E-Lite 45 Xtra: Strong sun control and lots of daylight

The neutral premium sun control film ensures a high light gain and low heat radiation. The heat development in the building can be efficiently reduced and the energy efficiency of the installed window glazing can be sustainably increased. Energy and electricity consumption for air conditioning systems can be saved permanently in this way.

What’s special: neutral look without a mirror effect

The innovative sun protection for windows is self-adhesive and regulates the room temperature by shielding solar energy. The neutral design ensures a clear view and a neutral look without a mirror effect. Modern and listed buildings in particular benefit from an almost unchanged building appearance. Because: The high-performance film E-Lite 45 Xtra, which is applied from the outside, is hardly noticeable to the naked eye after it has been applied.

The guarantee: optical filters and nanoparticle technology

✔ Highly effective combination of successive filter layers with the latest nanoparticle technology.

✔ The film is a first-class alternative to most PRESTIGE heat protection films on the market.

✔ Due to its metal-free construction, the film causes fewer reflections than other sun protection films.

Technical and optical detail informations

*All values are manufacturer values and apply to double glazing (insulating glass)

Long durability and manufacturer’s guarantee

The sun control film has a durability of 10 years or more when used outdoors on vertical glazing (normal Central European climate). When attached to slanted glazing outdoors, the durability is reduced accordingly due to the higher environmental impact.

Regardless of the long durability, a manufacturer’s guarantee of 7 years for vertical and 3 years for inclined glass surfaces is granted. The guarantee applies to peeling and yellowing of the high-performance film if the edges of the film are sealed all around with silicone.

Retrofitting the window film in a few steps

The bubble-free retrofitting of the window film is carried out using the so-called wet adhesive process. Thoroughly clean the surface to be glued and spray it with some installation fluid. Remove the protective film on the back, spray the adhesive side and attach it to the window. Using a squeegee, smooth everything out from the middle without any bubbles and wipe dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.

Just buy the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 2.50 euros. It is included free of charge.

• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for the window film are shipped with each order for free.