Carbon film Mactac Carbon Fiber BF black
89,50 €
Carbon film Mactac Carbon Fiber BF in black. With perceptible 3D surface. Polymer PVC film for car, design & advertising. For indoor + outdoor at online best price!
- Description
- Additional information
- Reviews (0)
Description
Black carbon film with perceptible 3D surface
The black carbon foil gives the glued surfaces a deceptively genuine carbon look. The 3D surface provides a tactile surface structure. It is an extremely resistant quality foil for a maximum revaluation of the glued surface. The film has proven itself in practice, it is extremely flexible and resistant. The advantage: The film and suitable for use on smooth and curved surfaces. It allows easy adaptation to complex contours and easy edge gluing. Due to the high-quality processing, the polymeric quality film is resistant to wear and tear, weather-resistant and can be removed without leaving any residue if necessary.
Polymeric foil in Mactac quality for indoor + outdoor
The Mactac quality of the carbon foil is guaranteed by adherence to the strict ISO quality assurance standards. Flat 2D and curved 3D surfaces can be professionally bonded thanks to the micro-structured adhesive surface and bubble-free technology. The film is ideal for all parts of the car such as bonnet, bumper, sill, headlights, side panels, doors. It also provides perfect protection for the paint on trucks, motorcycles, motorhomes, boats and planes. In the home and office ideal for use on notebooks, smartphones and edges of furniture, glass tables and door edges.
Strong performance of the Mactac Carbon Fiber BF series
| Material: | Polymeric pvc, with embossed structure, self-adhesive, black |
| Thickness: | 130 my (=0,130 mm) |
| UV-protection: | effective protection against bleaching of paint and paint |
| Resistance: | External weather conditions, cleaning equipment, windscreen cleaner, antifreeze, car shampoo, petrol and diesel fuel as well as most petroleum-containing oils, greases, solvents, acids and alkalis |
| Load capicity: | 40 N / mm² tensile strength and 150% dehumidification according to DIN 53455-5 |
| High pressure cleaning: | No surface damage or loss of adhesion |
| Dimensional stability: | Bonded to aluminum, max. 0.5 mm measurable shrinkage according to FTM 14 |
| Temperature: | Minimum gluing temperature 10 degrees Celsius, usage temperature from – 40 degrees Celsius to + 90 degrees Celsius |
| Fire behaviour: | self-extinguishing on non-flammable surface according to ISO 3795 |
| Storage: | 2 years, without direct sunlight at 22 degrees Celsius and 50% humidity |
| Weather: | 5 years with vertical bonding and 3 years with horizontal bonding (Central European normal climate) |
*All values are manufacturer values
Careful cleaning of the surface before installation
Measure the surface to be covered and roughly cut the film. Thoroughly clean the surface and spray with a little release agent and lubricant. Peel off the silicone paper cover on the back, spray on the adhesive side and position on the surface. Depending on the course of the body edges and openings, place the film in the middle or start from the left or right, smooth the film with a squeegee without bubbles. After smoothing cut off any excess film edges and finally remove the transparent protective film, done.
Tips for the flexible 3D installation of the carbon foil
When bonding to areas with edges or beads, first the part of the carbon foil with the largest surface should be firmly nailed. This is often the case with door entries and loading sills. In the case of strong curves or curved surfaces, it may be necessary to carefully heat the carbon foil after smoothing with a hot air blower. The film can then be drawn into shape to allow wrinkle-free bonding. Since the carbon film is stretched by cutting off any overlapping film edges. Detailed installation instructions for carbon foils are included with each delivery free of charge.
Additional information
| Weight | 1 kg |
|---|---|
| Montage | exterior, interior |
| Einsatzzweck | scratch protection, paint protection, tuning |
| Anwendbarkeit | furnitures, plane and uneven surfaces, vehicles, trucks, motorcycles, notebooks, boats |
| Material | polymerized pvc with embossed 3D structure |
| Optik | opaque |
| Design | tinted |
| Foliendicke | 0,130 mm |
| Folienaufbau | unmetalised |
| Oberfläche | scratch resistant, easy to clean |
| Klebstoff | polyacrylate, permanently adhesive, removable |
| Abdeckung | one-sided coated silicone cardboard, removable |
| Brandverhalten | self-extinguishing, applied to a non-flammable surface |
| Temperatur | during installation from +5°C to +40°C |
| Rollenbreite | 152 cm width – 20,0 m length |
| Lagerung | 2 years at 15-25°C and 50% relative humidity |
| Lieferzeit | 1-3 Werktage |
| Brand |
Reviews
There are no reviews yet.