Mirror film Aslan SE 75 MirrorEffect Silver
74,40 €
Mirror film with MirrorEffect as mirror. High gloss mirror replacement. The Aslan SE 75 Silver is self-adhesive and scratch resistant. ►Order it in the online shop!
- Description
- Additional information
- Reviews (0)
Description
Mirror film with MirrorEffect for use as mirror
The mirror film Aslan SE 75 is a self-adhesive polyester film made of PET with a high-gloss mirror look. It is glued to smooth and even substrates and is therefore ideal for use as a mirror (mirror replacement with mirror-like properties). Large and light mirror surfaces are created, which visually give rooms more depth and brightness.
The adhesive film is of high quality and has a particularly scratch-resistant film surface. Due to its high scratch resistance, the MirrorEffect film can be easily cleaned at any time using conventional glass cleaning products. No additional protection (application tape) is necessary during bonding. The Aslan SE 75 can be installed indoors and outdoors on flat surfaces. No bonding to outgassing surfaces such as untempered acrylic glass.
Lightweight and unbreakable design element
✔ Bonding on smooth, solid and non-curved surfaces such as glass panes or plastic panels.
✔ When professionally glued on, the mirror film is an impressive, large and unbreakable design element.
✔ The mirror effect film becomes a mirror which, when glued to plastic, weighs only a fraction of mirror glass.
✔ Areas of application include shop and trade fair construction, fitness studios, showrooms, riding halls, dance studios and discos.
Technical and optical characterisitcs
| Material: | Metallized polyester film made of PET (polyethylene terephthalate) with high resistance, resistant to strong temperature fluctuations. |
| View: | Heavily mirrored surface in classic silver on the front and back |
| Plotting ability: | The mirror film is ideal for plotting. A lettering height of at least 10 mm is recommended. When plotting, you should work with increased knife pressure and the plotter knife should be set to a high quality. |
| Daylight: | 0% light transmission, 90% light reflection |
| Temperature: | During bonding from 15 degrees Celsius for dry bonding and from 20 degrees Celsius for wet bonding |
| Cleaning: | The mirror film is ideally cleaned with a microfiber cloth or with commercial cleaning agents. Abrasive and aggressive solvents should be avoided. |
| Durability: | 3-5 years outdoors, with vertical bonding in the Central European normal climate |
*All values are manufacturer values
The installation is done in a few steps
The film can be installed dry or wet. be glued. In any case, clean the surface to be coated so that it is free of dust, grease and dirt. If the film is installed dry, we recommend laying it with a felt squeegee in high humidity to minimize static charge on the film during gluing. For wet installtion, spray the cleaned surface with some installation fluid. Remove the protective film on the back, spray the adhesive side and apply it to the glass surface. Smooth everything out using a squeegee starting from the middle without any bubbles. Wipe it dry, done.
Order the mirror film in just a few steps
Simply order the mirror film in the offered film width by the meter. It is also possible to order precise millimeter cuts. In just a few steps you will be guided through the ordering process in the online shop. Assembly instructions for attaching the film are included free of charge. The film will be delivered within 1-3 working days after the order has been placed.
Additional information
| Weight | 1 kg |
|---|---|
| Montage | exterior, interior |
| Einsatzzweck | mirror, plotting |
| Anwendbarkeit | metal, mirrors, marble, plane glass panes (u.a. single-, multiple- and insulation glazing, ESG tempered- and VSG laminated safety glass, TVG partially toughened glass), plane surfaces |
| Material | polyethylene, metallized |
| Optik | reflective |
| Design | mirrored strong |
| Foliendicke | 0,075 mm |
| Oberfläche | special hardened, easy to clean |
| Klebstoff | polyacrylate, pressure sensitive, removable without residue |
| Abdeckung | siliconized polyester, removable |
| Brandverhalten | B – s1, d0 flame retardant according DIN EN 13501 |
| Temperatur | during installation from +15°C |
| Beständigkeit | installed in the range from -30°C to +80°C, no change |
| Rollenbreite | 1,25 m width – 25,0 m length |
| Menge | linear meters, millimeter cuttings and rolls available |
| Lagerung | 2 years at 15-25°C and 50-60% relative humidity |
| Lieferzeit | 1-3 Werktage |
| Sonnenschutz Wert |
Reviews
There are no reviews yet.