Sun control film Cold Steel 50 Light grey
35,90 €
Sun control film Cold Steel 50. Neutral sun protection in light grey. Provides plenty of daylight at the window. With low light reflection. ►Just buy it online here!
- Description
- Additional information
- Reviews (0)
Description
Sun control film in light grey for a view-free panorama
This high-quality sun control film in light grey ensures pleasant 49% sun protection on the window. The high daylight permeability enables a sensationally view-free panorama. Inside the room, annoying sun glare caused by sunlight shining through is prevented. Due to the reduced radiation of solar energy, the room temperature is noticeably improved. In summer, therefore, fewer energy costs for air conditioning are necessary. The Cold Steel heat control film is extremely easy to clean and completely operation and maintenance free.
Neutral color developed in U.S. patented process
The neutral color of the Cold Steel 50 was developed in a U.S. patented process. When viewed from the inside, only an inconspicuous light gray tint of the panoramic film on the coated window pane is noticeable. The weak reflection of the film in daylight enables the pleasant and neutral appearance: the external appearance of the glass surface and that of the building are hardly changed.
Technical and optical detail informations
| Material: | Scratch-resistant polyester film with aluminum oxide coating, light grey |
| Quality assurance: | ISO 9001:2008 certified manufacturing process |
| Heat protection: | 49% heat shielding after applying the sun protection film |
| Daylight: | 51% light transmission, 99% UV protection |
| Solar energy: | 40% transmission, 20% reflection, 40% absorption |
| G value: | 0.51 degrees of solar energy enter the room |
| Anti-glare: | The sun protection film reduces sun glare by 43% |
| Manufacturer’s warranty: | 10 years for peeling, yellowing, demetallization of the quality film |
*All values are manufacturer values and apply to single-pane glazing
Installation of the window film in a few steps
The bubble-free installation of the window film is carried out using the so-called wet adhesive process. Thoroughly clean the surface to be coated and spray it with some installation fluid. Remove the protective film on the back, spray the adhesive side and apply to the glass surface. Using a squeegee, smooth everything out from the middle without any bubbles and wipe dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.
Just buy the fitting accessories online
• Up to 2.5 sqm we recommend the DIY accessory set worth 2.50 euros. It is included free of charge.
• From 2.5 sqm just order the installation material foil size depending in our asseccories sortiment.
• Detailed installation instructions for the window film are shipped with each order for free.
Additional information
| Weight | 1 kg |
|---|---|
| Montage | interior |
| Einsatzzweck | sun control, glare reduction, uv-filter |
| Anwendbarkeit | single-pane-glazing, double-pane-glazing without thermal insulation |
| Material | metallized polyester, REACH compliant |
| Optik | neutral |
| Design | mirrored light |
| Foliendicke | 0,069 mm |
| Oberfläche | special hardened, easy to clean |
| Klebstoff | polyacrylate, water activated, removable without residue |
| Abdeckung | transparent polyesterfilm, removable |
| Brandverhalten | B – s1, d0 flame retardant according DIN EN 13501 |
| Temperatur | during installation from +5°C to +40°C |
| Rollenbreite | 1,52 m width – 31,0 m length |
| Menge | linear meters, millimeter cuttings and rolls available |
| Lagerung | 2 years at 18-22°C and 45-55% relative humidity |
| Lieferzeit | 1-3 Werktage |
Reviews
There are no reviews yet.