Sun control film DSS 330 Silver medium Exterior

Very good compromise between sun control and daylight

The sun control film is self-adhesive and is attached to the outside of window panes. Compared to the film model DSS 220, it has a reduced mirror effect on the outside. When viewed from the inside – with a permanent clear view of the outside – a tint in medium silver gray of the window film is noticeable.  The daylight permeability is pleasantly high. In bright sunlight, annoying sun glare is reduced by 63%. The DSS 330 model offers a very good compromise between heat protection and daylight for use in residential and commercial buildings.

Combines energy efficiency and living comfort

With 66% heat protection, sunlight on the window is pleasantly reduced. The result is a permanently cool interior atmosphere that meets the highest standards of living comfort and indoor climate. The energy efficiency of the installed window glazing is sustainably increased through retrofitting. Energy and electricity costs for air conditioning and ventilation systems can be saved permanently as a result of the lower utilization. This has a positive effect on the building’s CO² emissions and protects the environment.

Resistant to external weather influences

The well-tempered solar flat glass film was developed specifically for exterior installation: It is permanently resistant to external weather influences and has a scratch-resistant surface. This enables simple and easy cleaning with water and conventional glass cleaning agents.

Technical and optical characteristics

*All values are manufacturer values and apply to single glazing

Long durability and manufacturer’s guarantee

All XTRA models have a durability of 10 years or more when used on vertical outdoor glazing, all PREMIUM models of 7 years (normal Central European climate). When attached to slanted glazing outdoors, the durability is reduced accordingly due to the higher environmental impact.

Regardless of durability, all XTRA models come with a manufacturer’s guarantee of 7 years for vertical and 4 years for inclined glass surfaces. All PREMIUM models have a guarantee of 3 years for vertical and 2 years for inclined glass surfaces. The guarantee applies to peeling, yellowing and demetallization when the edges of the film are sealed with silicone.

Retrofitting the window film in a few steps

The bubble-free retrofitting of the window film is carried out using the so-called wet adhesive process. Thoroughly clean the surface to be glued and spray it with some installation fluid. Peel off the protective film on the back, spray the adhesive side and attach it to the window. Using a squeegee, smooth everything out from the middle without any bubbles and wipe it dry, and you’re done. Any white discoloration of the adhesive will disappear within a few days.

Just buy the fitting accessories online

• Up to 2.5 sqm we recommend the DIY accessory set worth 2.50 euros. It is included free of charge.

• From 2,5 sqm just order the installation material foil size depending in our asseccories sortiment.

• Detailed installation instructions for the window film are shipped with each order for free.