Installation fluid 5,0 l

Installation fluid for foil installations

Professional installation fluid for bubble-free installation of self-adhesive films in four sizes. The concentrate ensures excellent gliding properties of the film when installed on the surface. The film can be easily positioned on the wet surface and pressed down with a squeegee. After squeegeeing out, the assembly fluid ensures optimal adhesion of the adhesive to the surface.

It is best to use the finished concentrate in a spray bottle, see Accessories in the online shop.

Dilution of the concentrate with distilled water

For optimal use of the concentrate, we recommend diluting the professional release and lubricant concentrate with distilled water in a ratio of 1:5. Tap water containing lime should not be used for dilution, otherwise lime residue will form. nd can be visible under the installed window film.

Tip: We completely advise against using water diluted with dishwashing liquid as an assembly fluid, as this can result in visual discoloration of the film adhesive.

5.0 l installation fluid suitable for large areas

• 0.5 liters of installation concentrate are enough for approx. 7.5 square meters of film surface

• 1.0 liters of installation concentrate are sufficient for approx. 15 square meters of film area

• 5.0 liters of installation concentrate are enough for approx. 75 square meters of film surface

• 10.0 liters of installation concentrate are enough for approx. 150 square meters of film area